Performance Topcoats

Abrasion Resistant || Chemical Resistant || Stain Resistant
Light Reflective or Low Glare Finish

Urethanes || Acrylics || Epoxies

Dur-A-Flex® Performance Topcoats offer you a complete selection of finishing solutions and give you an extra measure of control over the appearance and function of your flooring systems. Together with the inherent chemical and abrasion resistant qualities of Dur-A-Flex® coatings and matrix layers, Performance Topcoats deliver superior corrosion resistance and increase your floor's longevity. Available in high-gloss, satin or flat urethane formulations or an attractive low-glare satin finish acrylic coating, you can brighten or soften the lighting in your facility. Whatever your flooring application, Dur-A-Flex® topcoats make your floors better looking and easier to maintain.

 

Two Component Systems

Poly-Thane 1™
Superior corrosion-resistant clear coating for the highest level of chemical resistance (may amber slightly); recommended as a topcoat for Shop-Floor™, Dur-A-Gard™; and Dur-A-Quartz™ flooring systems.

Poly-Thane 2™
Non-ambering corrosion-resistant clear coating; recommended as a topcoat for Dur-A-Quartz™ decorative epoxy flooring systems.

Poly-Thane 3™
Non-ambering corrosion-resistant pigmented coating; recommended for Shop-Floor™ and Dur-A-Gard™ flooring systems. Many standard colors, finishes, and custom color matches available.

Applications Include:

|| Aircraft Hangars	|| Pharmaceutical Plants
|| Clean Rooms	|| Automotive Service Areas
|| Plastic Manufacturing Plants	|| Chemical Storage Areas
|| Fire-Rescue Emergency	|| AGV Charging Areas
|| Kennels

 

These 100% reactive acrylic resins, based on methyl methacrylate, are the fastest curing topcoats in our line. When you prefer a low-glare satin finish that tends to diffuse light, these coatings are the perfect choice.

Cryl-A-Top™
This fast-curing high-strength topcoat is UV-resistant and will not yellow or chalk. Recommended as a topcoat for Cryl-A-Shield™, Cryl-A-Gard™, Cryl-A-Floor™, Cryl-A-Quartz™ flooring systems.

Cryl-A-Top CTR™
Highly scratch-resistant, medium-viscosity CTR is your best choice for extra chemical- and thermal-shock resistance with a methyl methacrylate flooring system.

Color: Standard Cryl-A-Flex™ pigments and aggregate colors. Custom colors available upon request.

Applications Include:

|| Kitchens	|| Warehouses
|| Laboratories	|| Machine Shops
|| Freezers

 

Dur-A-Glaze Novolac™
This 100% solids, no-VOC, epoxy coating is specified as a topcoat when the ability to withstand corrosion and high heat is a priority.

Crete-Gard™
Formulated especially for Dur-A-Crete™ trowel applied mortar systems, this advanced-chemistry, super-high- viscosity hardener, saves time and material-enabling you to finish your floor with a single coating.